CY USB Type C USB-C Male OTG Host Type 5.1k Resistor Adapter with Black Housing Cover DIY 24pin
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9Thumbnail 10Thumbnail 11Thumbnail 12Thumbnail 13Thumbnail 14

CY USB Type C USB-C Male OTG Host Type 5.1k Resistor Adapter with Black Housing Cover DIY 24pin

3.8/5
Product ID: 173710288
Secure Transaction

Details

  • Compatible Devices
    PC
  • Specific Uses For Product
    PC
  • Connector Type
    USB Type C
  • Color
    adapter 5.1k
  • Item dimensions L x W x H
    3.94 x 3.94 x
📦5pcs/lot
🔌USB Type-C
⚙️5.1k Resistor

Description

🔧 DIY Your Connectivity Game!

  • 📏 COMPACT SIZE - Perfectly portable at just 3.94 x 3.94 x 0.39 inches.
  • 🖤 SLEEK AESTHETIC - Black housing cover for a modern, stylish look.
  • 🔄 REVERSIBLE DESIGN - Easily plug into any USB-C port, no more fumbling!
  • 💼 PROFESSIONAL QUALITY - Designed for PC use, ensuring reliability.
  • 🛠️ DIY CUSTOMIZATION - Solder your own cables for a personalized touch.

The CY USB Type C OTG Host Adapter is a versatile tool designed for tech-savvy professionals. Featuring a 5.1k resistor, this adapter allows for easy connection to USB-C devices with a reversible design. Ideal for DIY enthusiasts, it comes in a sleek black housing and is perfect for customizing your own cables. Each package includes 5 adapters, making it a great value for those looking to enhance their tech setup.

Large manufacture image 1
Small manufacture image 1Small manufacture image 2Small manufacture image 3

Specifications

Connector Type Used on CableUSB Type C
Number of Ports1
Compatible DevicesPC
Specific Uses For ProductPC
Item Weight0.05 Kilograms
Package Quantity1
Item Dimensions3.94 x 3.94 x 0.39 inches
Finish TypesBlack
Coloradapter 5.1k black

Have a Question? See What Others Asked

I'm trying to rewire a chromebook charger with 3 wires (blue, black and white). Which pads do I solder the wires to?
What pin does each pad correspond to? Where is the documentation?
Does this allow a dumb devices to draw 900ma and 5v?
Do you have a version of this with the socket / female usb-c connector?

Reviews

3.8

All from verified purchases

V**E

5.1k resistor version works great for replacing USB-A plug

This worked great for my use case, which was replacing the USB-A end of my Garmin Zumo XT mount cable with USB-C. The 5.1k resistor is necessary to signal to the USB-PD (power delivery) charger that this is a "dumb" USB device and to only provide 5 volts. If that resistor isn't there, the charger will not provide any power.Of course, if you're replacing a USB-C plug on a cable you intend to use with an actual USB-C device, you'll want to use the version without the resistor, so that the charger and device negotiate the proper voltage/current for that device using the USB-PD standard.

D**M

Housing for the connector doesn’t work but the connector does.

As far as the connector and electronics go it works. Had to figure out the correct order for the wires. My kid broke her usbc gaming mouse connector and I chose this to replace it. The wires were white, yellow, green, blue. Different than what I found online so I took apart the old connector to get that correct order. The plastic housing for this is complete crap. It doesn’t lock together and didn’t stay in place so the plug got pushed in and didn’t go into the computer. I ended up trying super glue but it didn’t stick to the plug. So I used instamorph moldable plastic to create a housing. Works great.

L**N

Having problems

I can't seem to get the wires right. And get the unit to assemble. Don't know what I'm doing wrong.

L**Z

Great little connectors.

Bought these a long time ago. Finally got around to use one on a long 6 foot cloth braided cable I really liked, that had the the C end damaged. Had to expand the little rear rubber boot with a reamer and a hot gun so that it would fit over the cloth sleeving, and also enlarge the hole where the cable and the boot passed through. As some suggested on previous reviews I used a few drops of thin super glue to adhere the circuit board sleeve to the outer casing. I did screw up by shorting the ground with the data + because the insulation on the wires for the cable I used melted very easily, but since this cable is only used to charge non-smart devices it'll be fine.

Z**S

Tiny contacts, no strain relief, no provision to attach housing

I just needed laptop charger fix, typically 3-4 wires, 1 line in, 1 gnd and on or two to p05 and p06 respectively. Wishing there was a solution with a easy attachment for the 4 wires, could make em nice and big! Used hot glue and just filled the housing, hoped it would act as strain relief as well as prevent shorts, etc. No Bueno, lasted about a week

P**K

Hard to tell which pins are which

There are no pin labels on the board so without a pinout diagram, it's hard to tell which pin is which. I attached two diagrams that were found using an Internet search for the part number, UC-050-BK. I'm hesitant to try these because the diagrams found were not from the manufacturer. It might be better to hack an old cable than use these (or even buy a new cable and hack that, if you can trust the wire colors). It didn't escape me that others have posted pictures of items with labeled pins -- photos of the ones I received are also attached (no labels at all).

B**D

Great for my odd ball use.

I have some ultra small computers that have no power lights, so cannot tell if on or off. I wired a simple LED to these and plugged into an unused USB-C port so i can tell if powered on or off. perfect for my project.

A**V

Good for DIY

Everything came together well. Basic steps in photos:1. Put the body on the wire first. Then a flexible tail is put on the wire. Next, solder the wires to the connector. Check functionality.2. The inner case is pushed onto the metal part of the connector and beyond. The voids are filled with hot glue. Hint - apply hot melt adhesive in a thick layer around the green board and then push the inner case. Excess hot soft glue will be cut off by the inner case during the push-in.3. Slightly slide the inner case into the outer shell and apply a couple of drops of superglue on both sides and then push it all the way. A paper towel will come in handy to remove the extruded superglue.4. Done.5. In fact, the short cable is made for charging Garmin from a Samsung phone while traveling (Samsung, at least the S series performs the function of a power bank), but in this configuration, it is difficult to photograph if there is no mirror.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
KD 4.30

Duties & taxes incl.

KUWAITstore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Cy Usb Type C Usb C Male Otg Host Type | Desertcart KUWAIT