MOTOKU 2 Pcs of ABS Wheel Speed Sensor Wire Harness Pigtail Plug Replacement for Buick Century Lacrosse Regal Rendezvous Cadillac CTS DeVille STS Chevrolet Impala Monte Carlo Uplander

Good price for exactly what was needed. It is a wiring harness, so you have some work to get it installed. It worked perfectly to replaced the ABS harness to the front sensor. The wiring was long enough, which is important.

Abs kept going off and on when I turn to the left but Amazon came through clutch! Easy installed on both sides with new wiring. Saved me a lot of money!!

Worked great for 2012 Impala. No more traction control kicking in every time I took off. Like everyone else says though, the retainer clips on these are absolute garbage and break if you look at them wrong. Seriously, like get better materials for the clips and this would be a 10/10 product. Works as is, just make sure you have zip ties on hand

Used the Motoku ABS wiring harness to repair broken/cut ABS circuit on my 2006 Buick. This product was a perfect fit and comes with splice kit with shrink wraps. Additionally, there are ample wire harness place holder connectors which fit perfectly securing the harness in its designed routing location. Highly recommend!

These were exactly what my 2013 Impala needed to get my ABS and Traction control to stop throwing fits and pulsing my brakes at low speeds. I spliced the driver's side in where they meet the harness in front of the transmission, and the passenger side was spliced behind the engine through the wheel-well. The passenger side was easier than the driver side, but they were both fairly simple.I did not use the included crimps or heat shrink, nor would I recommend using them. They are very cheap and you can get better parts at your auto parts store. Personally I always solder all my splices, since I'm a professional mechanic who refuses to take chances with inferior crimp connections, and, I always use a high quality heat-shrink with glue inside for it's superior water resistance.

Haha I figured it out finally!! After changing hubs, etc etc ... oh man. Perfect! My impala is finally happy n not screaming at me. Thanks!!

Is exactly as pictured. Vey nice looking harness. Fits well. You better have some zip ties because the push pin / fur tree clips are made of very brittle plastic that crumbles at room temperature.

Had driver side abs harness soldered together for about a month now and been MN slush and what not and held up so far. Decently priced as well. Kept other side harness for back up just incase.

No more dings or lights on the dash. So much better it was well worth it. And best part is that she can use cruise control again.

Saved the day! Perfect fit. Two harnesses per pack.

Wires were Good. Just wished the color code matched up

Worked as it should

over priced ? is what this item is cause ? you still have to wire it up to original wire ? its only got the 1 plug in on one end then other end has to be connected to original plug in wire , so it would be worth the time to go to wrecker to get a used one basically for free ? as wreckers dont put a price on something like this