eSUN ABS+ Filament 1.75mm, 3D Printer Filament ABS Plus, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black

Relatively easy to print with once you've learnt the temps it likes, nozzle height etc

One thing you should know is this filament absolutely needs an enclosure, it doesn't need to be super high tech, a cardboard box works but as long as you have something basic you'll be fine. If not the resulting prints I found are quite brittle. I've been printing this at 250 degrees and its come out a really nice matte black. The parts seem to be strong too.

I have printed a fair few parts for a voron switchwire using this filament and it has printed superb, a really nice matt finish and no warping or layer cracking.

I bought this thinking I need flexible white for a print. When looking at the roll it looks like PLA with a higher print temperature. I started a print which failed due to warping, but when removing from the build plate, the whole print cracked and snapped just like PLA does under pressure.

A little different to ABS and I think it has a slightly lower temperature when it starts to soften.I have used the white and purple, purple to build my Voron.Prints nicely with no issues.

This filament prints ok but I don't like the Matt rough finish. I get loverly looking printed parts of other ABS filament.

Really pleased with eSun ABS+, I used it for virtually all of my 3D prints. It doesn't have any noticeable warp in my enclosed printer (Voron 2.4), which is a big improvement over regular ABS. I've not found any other filament that is as consistently good and relatively cheap. It usually costs under £20 for a spool.There is a little smell to this ABS+, but not as pungent as regular ABS. I would suggest still using this within an enclosed printer.

Slightly matt finish