JENOLITE Rust Converter Spray | 400ml | RUST TREATMENT & RUST INHIBITOR | Fast Acting Epoxy Based Rust Converter For Metal | Converts Rust Into Stable, Ready-to-Paint Surface

We have an old car that was starting to rust. It took a couple of applications but eventually worked. It dries to a matt black colour and since our car is black we’ve left it uncovered as it says you can as we are not precious about such an old car. You could spray over it tho if you choose. I did wear a mask, goggles and gloves also bought from Amazon as it says it’s quite toxic but I didn’t have any problems.

Normally buy brush on rust converter, recent discovered spray bottles but they always clog. This is amazing though. Ridiculously easy to use and good coverage. Really impressed not sure I will ever go back to the brush

It's not a miracle cure for rust and the prep is all important before applying I wouldn't recommend for deep heavy rust areas as the cost would not justify the end result ok for surface rust but for rusty sills it's better to strip down fill and paint-wouldn't put anyone off buying but don't expect miracles.

Easy to use and dry quick. We use it to fix our car where were rusty.

Very good product just a bit pricey

After a bit of research into what product was best for my needs, I opted for Jenolite Rust Converter Spray. Stone chips had broken through the paint around the arch areas of my campervan, looking unsightly. A quick rub down on the affected area with 80 grit oxide paper back to clean metal, masking tape applied to avoid any overspray, then follow the instructions on the can - shake contents for a few mins, then apply from around 25cms, leave to dry circa 15 mins, then re-apply. It's clear initially, but as it gets to work it turns black, after 2 coats a thick protective layer is formed, after fully dry / cured the epoxy feels tough and has good coverage, I'm letting it fully harden over this week, and will look to apply a top coat of colour matched spray paint, and clear lacquer top coat to blend it in, and will then apply 2 coats of the Jenolite on top of the colour matched spray paint for added protective layer as it is clear. Good product, good performance straight out the tin with minimal prep, instructions are simple to follow.

OK product, but I thought it would turn the rust black which it doesn't seem to do. I wire brushed the surface rust off and when sprayed just went a bit darker. It does seem to protect it though so I gave it 3 coats.

This really does work. Best I have ever seen