be quiet! Shadow Rock Slim 2 160W TDP CPU Cooler | Intel 1700 1200 2066 1150 1151 1155 2011-3 Square ILM | AMD AM4 | Silver | BK032

My super old Corsair closed loop CPU water cooling block died so I needed a not too expensive cooler to tide me over until I do a new full computer build. This cooler was well-reviewed on several sites.First impressions:This fan is big! Maybe I was so used to staring at my tiny watercooler block? That being said the actual heat sink is fairly thin. Big fan = good cooling with low RPMs.Install:The only down side is that the instructions were printed pretty tiny and thus hard to read. The backplate is held in place by plastic retaining clips. No you don't have to snap them on to the base of the screws - they are meant only to hold the backplate in place temporarily until you can affix the screws on the main side. Came with plenty of thermal paste although most enthusiasts will prob want to pick up their own "high end" thermal paste. I cleaned the CPU with some acetone and applied a thin layer of paste. The heatsink base is well polished. For my Z68 Mobo I screwed on two arms onto the cooler base and these lined up well with the backplate holes. No issues - everything lined up well.Use:This cooler really impressed me. With my i7-2600K clocked to 3.5 (stock is 3.4) GHz, I'm getting temps in the mid 40's (C) under full load.Would recommend!

This cooler is compact and is very well-built. The aluminum finish on top compliments metallic/silver cases very nicely makes for a clean, elegant and industrial appearance.Cooling performance is acceptable - it's on par with Hyper 212 Evo and performs better than my Corsair H75 liquid cooler without the added noise.As far as price/performance is concerned - It performs better than Cryorig H7 for a few dollars more and looks significantly better than Noctua coolers while being a bit cheaper. I personally think the cooler is sitting at a very good spot. Build quality is on par with Noctua without the elegant packaging and case badges.I think Bequiet coolers deserve a lot more attention than what I'm seeing based on the 4 reviews left so far. Traditionally speaking, good looking air coolers are rare (hence all the people going AIO liquid coolers), however, this item looks much sleeker in person compared to all my Corsair liquid coolers and is way quieter in comparison.I think I will be buying more Bequiet! products in the future. :)

This unit is replacing a Corsair H60 liquid cooling setup that had been running on an Intel i7 3770 for 6 years. The cooler is working well and keeps the CPU at 38 C at idle using the included thermal paste. No real added noise level to the system to keep it at that level is a plus. My biggest complaint is the HSF mounting setup for the 1155 pin CPU. Following the instructions as diagrammed didn't really work and took a little extra ingenuity to get it to mount right. However once that was figured out it mounted fine and seems pretty sturdy. I'll give Corsair better marks for their mounting setup for this pin CPU. Other than that the cooler is good for the money and does a good job keeping the CPU cool.

I finally got tired of my CPU fan's racket, and bought this cooler. It is, in a word, amazing. My CPU is as cool as it ever was (and maybe cooler) at a tiny fraction of the noise. It works absolutely great.One thing to mention is that this isn't a simple "unclip the old cooler, clip on the new one" installation. It requires unscrewing the existing cooler mount from the motherboard, and installing the new mount, with some screws coming in from the bottom side of the motherboard. If your case doesn't give you full access to the area under the CPU from the back, you will need to remove the motherboard from the case for the install (as I did). If you built your PC in the first place you'll be fine; if you're intimidated by disassembling a PC this is not the cooler for you.

Simple Install takes all of five minutes. I have it mounted to a 4690k overclocked to 4.5 ghz on all cores, and it performs very well. Keeping temps down around 42-45 celsius under a moderate work load (ambient room temp of around 24) at fan speeds in the 600 to 1000 rpm range. The fan is inaudible unless on full speed, and even then the sound is negligible. Does not cover the ram slots at all on asus z97m plus board. I would recommend for any build you're trying to keep silent.

Great cooler easy to install , whisper quiet, unfortunately Amazon is still selling old stock and it didn’t come with the right mounting hardware for a LGA 1700 install. Good news was I called Be Quiet in California and they sent me the right hardware at no cost. Just cost me a week, which can be hard if your excited to put together a new pc. If not for the delay this would be 5 stars….

Efficient design. Economy. Fit's well with all components in mATX case.Paired with AMD 5800X3D. (Using the included thermal paste)Idling at 41C and very quiet.77C under 100% CPU load, quiet, no harsh tones, feels good.Install is pretty easy. Need a decent phillips head screwdriver.mATX (CoolerMaster NR400) case with 2x 140mm Noctua intake ventilation fans (static pressure)AMD 7900XT gpu64GB DDR4-3200 1.35Vnoice

A pain in the rear to install, but boy oh boy does it work. Be Quiet! isn't just a name brand, this thing is practically silent. I've got it mounted on an i7-7700K and it keeps that CPU cool. I've never seen it go hotter than 45C under the heaviest of load. Solid product.