ANYCUBIC D Delta Kossel 3D Printer Pre-Assembled with Ultrabase Hotbed and Semi Auto Leveling Huge 370×370×455mm Print Size,Works with PLA, TPU, ABS, Hips, Wood

I purchased this machine refurbished, but the product I received was in brand new condition. The machine is mostly assembled, far less work to put together than previous generation delta printers. The out of the box print quality is excellent, and an experienced maker can go from box to printing within an hour.The machines construction is of excellent quality, it looks and feel great, and the touchscreen is quick and responsive. The instructions are great, first time ive ever purchased a 3d printer with complete and helpful instructions for operation. Delta printers take a bit longer to get dialed in, and the size of the printer can be daunting, but I am extraordinarily impressed with my purchase. Its performance is far superior to that of my Creality machines.

Motherboard that they ship unit with should be thrown to garbage right away. Extremely loud non-replaceable drivers and closed Chitu-like firmware - forget about any updates. Chinesium v5 close heatsink and hotend - not compatible with v6 without cutting effector. Aluminum extrusions paint job requires sanding, otherwise wheels roll bad. Ultrabase surface is good. That's about it. Mainboard, extruder, hotend, heatsink all must be replaced. They could make great product is the opted out for normal open source board w Marlin and installed v6 clone, but company is obviously clueless on what's going on. 2 stars for decent upgrade platform.

Phenomenal and very sturdy printer. Excellent engineering with this delta. Very Quiet. Already has NEMA 17 vibration dampers. Only would recommend if one wishes to print TPU, purchase an additional dual gear extruder mechanism as well as smoother boards to eliminate salmon skin. It eclipsed my previous delta printer. The computer interface is awesome and easy to work with.The internals are well thought out and accessible.

Honestly, I had high expectations when I bought the printer so it was going to be an uphill battle to really impress me. Before my wife would even allow me to buy this one I had to sell 2 of the other 3d printersI currently had because we didn't have space... (This guy is pretty big), but based on my reading it was going to be worth it. Due to a shipping snafu, (UPS fault not Anycubic), it arrived after I was travelling for work and it took some time before I was ready to sit down, set it up and play with it. Thanks to Anycubic's packing method, UPS was unable to damage the printer, but not for lack of trying... The setup was maybe an hour, I wasn't really rushed, but it was incredibly easy. After the setup I turned it on, but there was no power. I apparently missed the last step clearly stated in the manual which was to make sure the power supply was set to 110V, and once i switched it everything worked find. Had to Auto Home, then Auto Level, once I was done it suggested I print the level test print. And here was were my amazement really set in, it was incredible just how accurate (and fast) the print was. After printing it I was just amazed at how big the print was and how well it turned out. For reference, the photo attached is a picture of me holding the first print, I am almost 6'2 and actually have slightly larger than average hands for my size.... I mean look at the size of that print! Anyway, peeling the print off the bed was super easy and I am hard pressed to come up with anything negative to say... The package came with and extra hot end, extra print heads, 1kg of white pla (and some other sample reels of plastic) A very nice scraper, a great pair of tweezers, a fantastic set of cleaning tools and everything else you could think of that you might need. I don't I have ever been so impressed / happy with a purchase like this before. Kudo's Anycubic!

Get this printer!!! It is very awesome. I have a printer which costs twice this one and this is putting out my best work currently. Adhesion is like magic as long as you scrub with 99 %isopropyl between every print and dont go overboard with part cooling. Like Magic. Seriously. I've included a pic of a phone stand I made with it and it and the quality is unbelievable. I'm running all stock except for a part cooling duct which you can get on thingiverse.

I liked every thing about it. This is my second Delta printer. Super large print area. super large print height. Super easy to level the bed ( make sure its a cold machine when you do this)! Once you experiment with settings you will get amazing nice prints. I use Cura Software the version that came with this makes photo print amazingly nice. better than the earlier versions. I have printed in ABS PET-G and PLA . PET-G use a raft.

Great printer and great service. I had lost a screw for the sensor. All I wanted was just the size so I could buy a new one. They offered to pay me back for the screw. Great response time. I love this printer works great. Have ad only one bad print and that was because of old filament. Great job anycubic.

totally amazing right out of the box. once i started printing on rafts everything came out beatifuli recommonad this printer to anyone that has a spare corner to put it in.great work anycubic